|
Pro-Tatch® Wire Winder
& Rol-MorTM Wire Winder |
|
|
|
|
|
.
|
|
|
Rugged construction,
ease of use & superior performance have made
Pro-Tatch® the best selling wire winder on the
market.
The Pro-Tatch hydraulic wire winder is 100% Full-Satisfaction Guaranteed. |
|
Over 17,000
Pro-Tatch wire winders are in service... See for
yourself why Pro-Tatch is the world's best
wire winder!
|
|
Click for larger photos
 Click for larger photos
|
Fast & Easy To Use: The Pro-Tatch wire winder can be mounted and operated by one person. To wind, just park vehicle, tie a weight on far end of wire to prevent jumping (a length of chain works well), and pull wire toward you. When the reel is full, tie the roll with 4 retainer wires held by loops at the edges of the reel. The reel splits easily by spinning a single 1" nut off the end of the reel axle, and the roll lifts away without binding. To unwind, tie the wire end to a post or other anchor, set your hydraulic control lever to its "float" position, and drive. Control Valve: Ball valve (see blue handle in photos at left) provides infinitely variable speed control. Smooth -operating valve allows you to easily select any rotational speed from fast down to creep, as well as completely stopped. Wire winder's hydraulic motor provides ample power for hard jobs like pulling barbed wire through tall grass. Even the heaviest underbrush is no match for the Pro-Tatch winder. Always regulate speed from the hydraulics on the tractor and always plug the valve hose into the power side on the hydraulics. Large Capacity: Wire winder rolls barbed or smooth wire, or light cable. Holds 1/2 mile of barbed wire or 1 mile of smooth wire. (See below if you need a larger winder.) Rugged: 20" diameter, 12 gauge steel wire winder drum is virtually indestructible, and mounts on heavy duty frame constructed of 11 gauge, 3" square tube. Long life, replaceable, moly-impregnated poly bushings prevent wear to steel parts. Unwinding: After wire has been rolled up on the Pro-Tatch winder, they can easily be put back on the spool for unwinding. Just put your hydraulic lever in "float" position and drive... the circulation of hydraulic fluid through the motor provides perfect resistance to keep the reel from overspinning. If you're using a skid steer loader without a hydraulic "float" position, you can connect the Pro-Tatch's two hose ends together (using your own adapter) for the same effect. Mounts Available: The Pro-Tatch winder can be purchased with a 3/8"-thick steel plate Universal Mount, Bale Bed Mount, or the new quick-tach mount for 3-point tractor hitches (choose from Category I, Cat. II, or Cat. III narrow.) The new 3-point tractor hitch mount can be converted to fit a Cat. 1, 2 or 3 Narrow by simply changing the bottom pin size and configuration. Note: The Cat. 1 will include 7/8" bottom pins and no top pin (customer supplied.) The Cat. 2 will include 1-1/8" pins bottom pins and no top pin (user-supplied.) Questions on what category you might need? Cat. 1: Up to 65HP tractors. Pin size 7/8". Cat. II: 65HP to 125HP tractors. Pin size 1-1/8". Cat. III Narrow: 125HP to 200HP tractors. Pin size 1-1/8". This can vary depending on tractor manufacturer but in most cases will be accurate for what you need; call us for verification. Custom mounts can be fabricated with short lead time for any mounting requirements, including bale carriers and skid loaders. Versatile: The Pro-Tatch works fine as a wire winder, cable roller, wire rope winder. Will roll up almost any kind of cable or wire, including high tensile. Also unwinds. Free Shipping: Purchase price includes shipping to any
U.S. address except Alaska and Hawaii. Shipping to
Canada is available, contact us for quote. Complete: Includes frame, reel, hydraulic motor, valve and hoses. Just add your style of hose ends and you're ready to roll wire! Full Satisfaction Guarantee:
Pleasant Hill Grain will refund
your FULL purchase price within 30 days of purchase
if you are not satisfied. This wire winder is a
rugged piece of machinery that works great, and we
guarantee it to be free of defects in materials and
workmanship for 1 full year. Over 17,000 Pro-Tatch
winders are in service with well-satisfied farmers
and ranchers. We know you'll be pleased with this
product. >> To order online: Click
Here for our new website with online ordering
& more info, including video
 Simplified Detail Drawing of Pro-Tatch Hydraulic Wire Winder |
|
We’ve used
your wire winder for 18 months and have wound up
right around 1000 miles of wire. It’s done a lot of
work for us and held up incredibly well. Send us a
pair of bushings, and we also want to buy a second
winder. – Tom Nesbitt, Fort Collins CO
|
|
We rolled up
15,000 feet of barbed wire, some of which had to
be pulled out of vines and heavy vegetation. The
Pro-Tatch
worked perfectly every time and saved us
countless hours of back breaking work rolling
it by hand... my advice is,
buy it.
– Tim S., TX
|
| |
||
 |
 |
 |
| Optional wire guide:
$129.00 + s/h See below for details |
Optional (removable)
solid reels can be used in place of split reel. You
can keep wire on these reels until you're ready to
reuse it. $77.00 + s/h A modified solid reel is available with larger (8") diameter center for use with hi-tensile wire that will be re-used. Holds 1/2 to 3/4 mile of hi-tensile wire per reel. $82.00 + s/h |
Optional unroller arm designed for unrolling new rolls of wire. Bolts onto Pro-Tatch wire roller. Also adaptable to ATV or pickup. $179.00 + s/h |
|
New
Mega-Roller Model
|
||||||||
Need to roll up a full mile of barbed wire? Or two miles of smooth wire? The new Mega-Roller is now available! Mega-Roller model is $1,099.00 with 3/8" x 16" x 16" universal steel plate mounting. Mega-Roller model is $1,099.00 with Category II or Category III 3-point hitch. Removal of rolled wire from the Mega-Roller is done by removing the two nuts from the right side of the right-side support arm and lifting the arm away, then removing the nut from the 1" drive shaft, and sliding off the outer roller cone. All of this this takes a little under a minute. Call 1-800-321-1073 to order >> To order online: Click Here for our new website with online ordering & more info
|
|
Bale-Bed
Model
|
|
 The Pro-Tatch wire winder is available with mounting to fit your DewEze™ or other brand of bale bed. This model can be mounted on the inside or the outside of the arm and can be operated from either side of the truck. When ordering, we need to know the outside measurements of your bale bed arm only. This will ensure you order and we send the correct fit model for your bale bed. Typical arm measurements are 3"x3" (Part #: 3x3ARM), 3"x4" (Part #: 3x4ARM), 3.5"x3.5" (Part #: 35x35ARM) and 4"x4" (Part #: 4x4ARM). Other than the mounting style, this Pro-Tatch winder has the same performance specs as the standard unit. The Bale Bed model is $825.00 with
free shipping to 48 states. >>
To order online: Click
Here for our new website with online
ordering & more info
|
|
Optional
Wire Guide
|
|
 The Pro-Tatch optional wire guide mounts easily on all 3-point hitch and gasoline powered models only (it does not fit on the Univ. Plate Mount or Bale-Bed models). The wire guide can be operated from either side of the wire winder and provides handy assistance to produce perfectly wound rolls. $129.00 + s/h. Call 1-800-321-1073 to order >> To order online: Click Here for our new website with online ordering & more info
|
|
Five stars
aren't enough. If you have much wire to wind up,
it will pay for itself the first week of use. My
brother now uses the Pro-Tatch we got twelve years
ago, so I ordered another. – Tom M., WY
|
|
NEW!
Gasoline Powered Wire Winder
|
||||
|
||||
$1499.00 plus s/h (call 1-800-321-1073 for an economical freight quote) Call 1-800-321-1073 to order >> Click Here: For our new website with more info, including video |
|
So far we've
used it for high tensile wire and it worked
excellently. Better than our old winder. I'd
definitely recommend the Pro-Tatch to anyone
shopping for a winder.
– Mike M., ND
|
|
Rol-Mor Wire
Winder
|
|||||||
|
|||||||
The TC High Line cable roller is $5795.00 FOB. Call 1-800-321-1073 for an economical freight quote (local pickup also available.) This machine can be shipped to all 50 states and most overseas destinations. Call 1-800-321-1073 to order >> Click here: For our new website with more info |
 |
 |
|
Pleasant Hill Grain is a Member
of the Better Business Bureau |
|
Pleasant Hill Grain
210 South 1st Street, P.O. Box 7
Hampton, Nebraska 68843-0007
To
order call Toll Free: 1-800-321-1073 (FAX 402-725-3836)
From outside the
U.S. call 1-402-725-3835
|
PHONE
HOURS (Central Time Zone)
|
||||
|
